Samsung Galaxy S6 back cover repair guide

The back of the enclosure is broken or scratched.

In this guide, we show you how to replace your Samsung Galaxy S6’s defective back cover. This repair can help if your back cover is broken or cracked, or you want a new color.

Required tools

Flat Picks

Flat Picks

You need a very flat tool such as a flat pick to pry out parts that are glued in place.
from €11.95 on Amazon
Heat gun

Heat gun

You can use a heat gun to heat parts that are glued on so they’re easier to remove. In most cases, you can also use a hairdryer.
from €15.99 on Amazon
Steel Laboratory Spatula

Steel Laboratory Spatula

You need a flat and sturdy prying tool to disconnect glued parts.
on Amazon

Required replacement part

Samsung Galaxy S6 Back Cover

Samsung Galaxy S6 Back Cover

from €10.40 on Amazon

Show all replacement parts for the Galaxy S6

Getting started with the repair of your Galaxy S6

If you get stuck or have questions, you can post a comment. We’d be happy to help.

3 steps

Removing the back cover
The back of the Samsung Galaxy S6’s enclosure is glued firmly in place. To detach it, you have to constantly heat it with a heat gun so the glue will soften. Then you have to insert a plastic pick into the gap between the frame and the glass to detach the adhesive.

The gap between the aluminum frame and the glass is very small. We recommend that you use a very flat, sturdy object to get between them.

Carefully lift the back cover while using a suction cup.

As soon as a little gap opens up, use the plastic pick to avoid damaging the aluminum.

Inserting the pick
You should only insert the pick a few millimeters between the back cover and the frame to prevent damage inside the enclosure.

The back cover is glued to the entire outer edge of the Galaxy S6. Move the pick once around the entire phone.
The back cover is painted on the inside. Remove any adhesive residue carefully to avoid scratches or cracks.

Once you’ve detached all the glue, you can carefully lift the back cover.
Attaching the back cover
As a last step, you have to attach the back cover again.

The old glue is usually still sticky enough.

Put the back cover back on, heat it slightly and then use a little force to press it onto the smartphone for a while.