The back of the enclosure is broken or scratched.
In this guide, we show you how to replace your OnePlus 2 defective back cover. This repair can help if your back cover is broken or cracked.
Required tools
-
Flat Picks
Flat Picks
You need a very flat tool such as a flat pick to pry out parts that are glued in place.
from €11.95 on Amazon -
Heat gun
Heat gun
You can use a heat gun to heat parts that are glued on so they’re easier to remove. In most cases, you can also use a hairdryer.
from €15.99 on Amazon -
For storing screws
For storing screws
We recommend storing your screws so you don’t mix up the various screws and small parts.
from €10.99 on Amazon -
Menda ESD Spudger
Menda ESD Spudger
You need a flat plastic prying tool to disconnect the various plugs and connectors.
from €26.38 on Amazon -
Pick Set
Pick Set
You need a flat but stable tool such as a pick to pry out parts that are glued in place.
from €14.99 on Amazon -
Plastic prying tool
Plastic prying tool
You need a flat plastic prying tool to disconnect the various plugs and connectors.
from €14.99 on Amazon -
Steel Laboratory Spatula
Steel Laboratory Spatula
You need a flat and sturdy prying tool to disconnect glued parts.
on Amazon -
Phillips PH00 screwdriver
Phillips PH00 screwdriver
You need the right screwdriver for removing PH00 screws.
from €10.84 on Amazon
Getting started with the repair of your OnePlus 2
If you get stuck or have questions, you can post a comment. We’d be happy to help.
-
Switch off device
![OnePlus 2 - Switch off device 01]()
-
-
Removing the back cover
![OnePlus 2 - Removing the back cover 01]()
![OnePlus 2 - Removing the back cover 02]()
-
-
Attaching the back cover
![OnePlus 2 - Attaching the back cover 01]()
-
The right tools for your repair
Similar guides
You might also be interested in these guides.
You might be interested in
