Replacing the earpiece

OnePlus One Repair guide

OnePlus One - Replacing the earpiece

60 min.
Medium
18 Steps

Go to the guide

The earpiece isn’t working

In this repair guide, we show you how to replace your OnePlus One’s defective earpiece on your own. You need this repair if you can’t hear the person you’re talking to or the call is very quiet.

Required tools

For storing screws

For storing screws

We recommend storing your screws so you don’t mix up the various screws and small parts.
from €10.99 on Amazon
Menda ESD Spudger

Menda ESD Spudger

You need a flat plastic prying tool to disconnect the various plugs and connectors.
from €26.38 on Amazon
Tweezers

Tweezers

We recommend using tweezers to remove screws and various small parts from your device.
on Amazon
Steel Laboratory Spatula

Steel Laboratory Spatula

You need a flat and sturdy prying tool to disconnect glued parts.
on Amazon
Phillips PH00 screwdriver

Phillips PH00 screwdriver

You need the right screwdriver for removing PH00 screws.
from €10.84 on Amazon

Required replacement part

OnePlus One Earpiece

OnePlus One Earpiece

from €17.99 on Amazon

Show all replacement parts for the OnePlus One

Steps

18 Steps

Removing the SIM card tray

Removing the SIM card tray

Step 1

Removing the back cover

Removing the back cover

Step 2

Removing the plastic cover

Removing the plastic cover

Step 3

Removing the battery

Removing the battery

Step 4

Removing the speakers

Removing the speakers

Step 5

Disconnecting the antenna cable

Disconnecting the antenna cable

Step 6

Disconnecting the buttons

Disconnecting the buttons

Step 7

Disconnecting the connectors on the logic board

Disconnecting the connectors on the logic board

Step 8

Removing the logic board

Removing the logic board

Step 9

Removing the earpiece

Removing the earpiece

Step 10

Installing the earpiece

Installing the earpiece

Step 11

Installing the logic board

Installing the logic board

Step 12

Installing the buttons

Installing the buttons

Step 13

Connecting the antenna cable

Connecting the antenna cable

Step 14

Inserting the speakers

Inserting the speakers

Step 15

Installing the battery

Installing the battery

Step 16

Attaching the plastic cover

Attaching the plastic cover

Step 17

Attaching the back cover

Attaching the back cover

Step 18

Getting started with the repair of your OnePlus One

If you get stuck or have questions, you can post a comment. We’d be happy to help.

18 steps

Removing the SIM card tray
First turn off your OnePlus One.

You can use the SIM Tool or a paperclip to remove the SIM card tray. Press the SIM Tool into the small hole in the SIM card tray to remove it.
Removing the back cover
Insert a thin, flat, tapered spudger into the gap at the corner of your smartphone. There are several clips on the outside under the back cover. You have to disconnect them by moving the spudger around the entire smartphone one time. Alternatively, you can detach the back cover using your fingernails.

Then you can take off the back cover.
Removing the plastic cover
Remove all 15 Phillips screws that hold the plastic cover in place.

2 Phillips screws are hidden under a rubber cover. Use a sharp object to lift out the cover.

Now you can remove the following screws.
4 x 3.1 mm Phillips screws
2 x 3.1 mm Phillips screws (small)

Lift out the speaker cover. Carefully insert the pointed tip of the ESD spudger into the USB port and lift the black cover.
Removing the battery
If your OnePlus One is still on, turn it off now by holding down the standby button for about three seconds and following the prompt on the display.

Now you can detach the battery connector. Be very careful. Place the pointed tip of the spudger very slightly below the contact and carefully lift it up. The pictures show where you should put the spudger to avoid breaking off the little resistors even if it slips.

Now lift the battery with the spudger and then remove it.
Removing the speakers
Insert the flat end of the spudger below the cover at the level of the charging port and carefully lift the cover. The stereo speakers are under it.

Now you can remove them.
Disconnecting the antenna cable
ZFirst you have to remove the two black stickers on the side. You can easily pull them off with a pair of tweezers.

Now you can disconnect the antenna cable from the connector using the pointed tip of the metal spatula, and then remove it.
Disconnecting the buttons
The standby button and volume buttons are attached to separate ribbon cables, which are soldered onto the logic board.

Using the metal spatula, detach the cable, which is lightly glued to the frame.
Disconnecting the connectors on the logic board
Now you can disconnect the following five connectors. Be very careful.

Place the pointed tip or flat end of the spudger very slightly below the contact and carefully lift it up. Make sure you don’t break off the resistors/coils that are soldered onto the logic board.
Removing the logic board
Please remove the little screw close the camera connector Achte darauf, die kleine Schraube unterhab der Kamers zu entfernen.

Now you can carefully lift the logic board using the spudger and remove it by hand.

Removing the earpiece
Remove the earpiece. Insert the pointed tip of the laboratory spatula or spudger below the earpiece. It’s sometimes glued firmly in place. If you still can’t detach the earpiece, you can use a heat gun to warm it slightly and soften the glue.

Now remove it.
Installing the earpiece
Now put the earpiece back in the appropriate position.
Installing the logic board
Now put the logic board back in the frame.

Make sure the cables don’t get under the logic board.

Use the picture to check whether your logic board is positioned correctly.

Insert the little placeholder on the display connector.

Reconnect all the connectors to the logic board.
Installing the buttons
Install the standby button and the volume buttons again. Use the spatula to press them into the appropriate positions.
Connecting the antenna cable
Now guide the antenna cable back through the little opening and connect it securely to the logic board.

Then put the adhesive strips back on.
Inserting the speakers
Now install the cover with the stereo speakers and put them back in the appropriate positions.
Installing the battery
Put the battery back in and connect it.
Attaching the plastic cover
Now put the cover back on.

Then fasten all the Phillips screws again.
12 x 3.1 mm Phillips screws
2 x 3.1 mm Phillips screws (small)
1 x 3.1 mm Phillips screw

Don’t forget to put the little rubber plugs back in.
Attaching the back cover
It’s very easy to put the back cover back on. Put it on in the correct position and press it on all the way around the phone until it’s completely clicked into place.

Ø 3.7 (3 Ratings)

Bewerte unsere Anleitung

Hat dir unsere Anleitung weitergeholfen? Wir sind auf deine Beurteilung gespannt.

Submit rating

How did you like this repair guide?

Exceptional

Similar guides

You might also be interested in these guides.

Replacing the battery

Replacing the battery

OnePlus One

Replacing the screen

Replacing the screen

OnePlus One

Replacing the front camera

Replacing the front camera

OnePlus One

You might be interested in

Go to iDoc store

Get in touch with iDoc

Please contact our customer service for any questions about iDoc's products and services.

Send a message

If you have a question about a guide or want to give us general feedback, just use our contact form
Write a message
Free shipping

From a minimum order value of 79.00 € your order will be shipped free of charge within Germany.
Call iDoc

If you have any questions about our guides or services, call us from Monday to Friday, 10:00 a.m. to 6:00 p.m.
+49 30 200 514 455
5 star service

We offer top quality and service. Our customers confirm this as well.
Show reviews

Profi-Insights & Tipps für deine erfolgreiche Handy-Reparatur

iDoc schenkt dir den ultimativen Reparatur-Guide GUIDE GRATIS ANFORDERN

Profi-Insights & Tipps für deine erfolgreiche Handy-Reparatur

iDoc schenkt dir den ultimativen Reparatur-Guide GUIDE GRATIS ANFORDERN