Samsung Galaxy Note Edge battery repair guide

The battery life is low. Your Galaxy Note Edge keeps crashing or won’t charge.

In this guide, we show you how to replace your Galaxy Note Edge’s defective battery on your own. This repair can help if your Note Edge crashes during heavy use because the voltage temporarily drops, you can no longer charge it or turn it on, or the battery life is very low.

Required tools

Pick Set

Pick Set

You need a flat but stable tool such as a pick to pry out parts that are glued in place.
from €14.99 on Amazon

Required replacement part

Samsung Galaxy Note Edge Battery

Samsung Galaxy Note Edge Battery

from €11.10 on Amazon

Show all replacement parts for the Galaxy Note Edge

Steps

6 Steps

Removing the stylus

Step 1

Removing the back cover

Step 2

Removing the battery

Step 3

Installing the battery

Step 4

Attaching the back cover

Step 5

Putting in the stylus

Step 6

Getting started with the repair of your Galaxy Note Edge

If you get stuck or have questions, you can post a comment. We’d be happy to help.

6 steps

Removing the stylus
Use your finger to pull the stylus out of your Galaxy Note Edge.
Removing the back cover
Disconnect the back cover from the back of your device. There’s a little indentation at the top of your Galaxy Note Edge that you can stick your fingernail in. The back cover is hooked onto the device at several points so you have to use your finger in more than one place and then pull carefully.

Remove the back cover.
Removing the battery
Using your finger, lift the battery a little bit out of the enclosure.

Use your thumb and finger to take the battery out of the enclosure.

Installing the battery
Put the battery back in the enclosure. Make sure the battery’s four gold contacts are touching the four gold springs in your device.

Put the battery back in so it’s flush with the enclosure.
Attaching the back cover
Put the back cover on the back of your Galaxy Note Edge. Make sure the back cover is in the right position.

Press the entire surface of the back cover onto your whole smartphone so all the back cover’s clips click into place in your device.
Putting in the stylus
Put the stylus back in your device by pushing it into the opening at the bottom of the enclosure until it clicks into place.