Samsung Galaxy Note Edge chassis repair guide

The chassis is scratched or broken.

In this guide, we show you how to remove your Galaxy Note Edge’s chassis on your own. You need to remove the chassis if it’s damaged or destroyed.

Steps

10 Steps

Removing the stylus

Step 1

Removing the back cover

Step 2

Removing the battery

Step 3

Removing the SIM and microSD cards

Step 4

Removing the chassis

Step 5

Installing the chassis

Step 6

Inserting the SIM and microSD cards

Step 7

Installing the battery

Step 8

Attaching the back cover

Step 9

Putting in the stylus

Step 10

If you get stuck or have questions, you can post a comment. We’d be happy to help.

10 steps

Removing the stylus
Use your finger to pull the stylus out of your Galaxy Note Edge.
Removing the back cover
Disconnect the back cover from the back of your device. There’s a little indentation at the top of your Galaxy Note Edge that you can stick your fingernail in. The back cover is hooked onto the device at several points so you have to use your finger in more than one place and then pull carefully.

Remove the back cover.
Removing the battery
Using your finger, lift the battery a little bit out of the enclosure.

Use your thumb and finger to take the battery out of the enclosure.
Removing the SIM and microSD cards
Use your finger to remove the SIM card from the SIM card slot.

Remove the microSD card from the microSD card slot.
Removing the chassis
Unscrew the fifteen screws holding the chassis in place and remove them.
15 x 4.0 mm Phillips screw

The chassis is hooked onto the display frame. Disconnect it by inserting the pick between the chassis and the display frame and undoing the hooks. Start at the recess for the battery.

Move the pick around the entire device and completely disconnect the frame from the chassis.

Lift the chassis and remove it.

Installing the chassis
Put the chassis back in its original position on the display frame. Using your fingers, press the entire surface of the chassis onto the frame so the chassis clicks into place on the enclosure.

Use the fifteen screws to attach the chassis to the display frame.
15 x 4.0 mm Phillips screw
Inserting the SIM and microSD cards
Put the microSD card in the microSD slot and make sure it’s aligned right.

Using your finger, carefully push the SIM card into the SIM card slot and make sure it’s aligned right.
Installing the battery
Put the battery back in the enclosure. Make sure the battery’s four gold contacts are touching the four gold springs in your device.

Put the battery back in so it’s flush with the enclosure.
Attaching the back cover
Put the back cover on the back of your Galaxy Note Edge. Make sure the back cover is in the right position.

Press the entire surface of the back cover onto your whole smartphone so all the back cover’s clips click into place in your device.
Putting in the stylus
Put the stylus back in your device by pushing it into the opening at the bottom of the enclosure until it clicks into place.